Description

Hardware Specification
Copper Ports		24 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports with IEEE 802.3af/at PoE
SFP/mini-GBIC Slots		2 1000Base SX/LX/BX SFP interfaces
Switch Architecture		Store-and Forward
Switch Fabric		52Gbps / non-blocking
Switch Throughput		38.688Mpps@64 bytes
Address Table		8K entries
Share Data Buffer		4Mbytes
Flow Control		Back pressure for Half-Duplex IEEE 802.3x Pause Frame for Full-Duplex
LED		System: Power ,PoE In Use ( yellow) 10/100 LINK / ACT(Green), 1000 LINK ( yellow)

Standards Conformance
Standards Compliance	IEEE 802.3 10Base T IEEE 802.3u 100Base TX/100Base FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000Base T IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet

Environemmental
Operating		Temperature: 0 ~ 50 Degree C Relative Humidity: 20 ~ 95%
Storage		Temperature:  10 ~ 70 Degree C Relative Humidity: 20 ~ 95% (non-condensing)

Power over Ethernet
PoE Standard	IEEE 802.3af/at Power over Ethernet / PSE
PoE Power Supply Type	End Span
PoE Power Output	Per Port 52V DC, af:350mA . Max. 15.4 Watts at:720mA.Max.36W
Power Pin Assignment	1/2(+), 3/6(-)
Dimension (W x D x H)	440 x 220 x 44 mm, 1U height
Weight	4 kg
Power Requirement	100~240V AC, 50-60 Hz
Power Consumption /Dissipation	350 Watts maximum /1194 BTU/hr maximum

Product Overview
Modern business networks are used for increasingly diverse applications   traditional data streams, VoIP voice traffic, video output from digital security cameras and remote control devices to name a few. The range of devices attached to today’s converged network often need to be supported not just in terms of data   equipment such as VoIP IP telephones and Wireless Access Points frequently need to be powered in physical locations where mains power is not available or difficult to deliver. Providing power to such devices via an
Ethernet UTP cable is an elegant and easy to implement solution.
The 24 Port 10/100/1000Mbps PoE+ Switch offers advance switching controls and provides power to network devices using Ethernet cables. This scalable and cost effective solution allows a managed network to efficiently expand to previously unattainable levels.
compatible to IEEE802.3af/at. It can power both existing
10/100Base T network devices Wi MAX and wireless
IEEE 802.11n access points.

Ordering Information
Part Number Description

High Performance Wire-Speed Switching

The PSE3224SL offers 24 10/100/1000Mbps RJ45 ports and 2 Gigabit SFP ports. The two Gigabit SFP ports can be for 1000Base SX/LX through SFP (Small Factor Pluggable) interface. PSE3224SL boasts a high performance switch architecture that is capable of providing non-blocking switch
fabric and wire-speed throughput as high as
48Gbps. Its two built in GbE uplink ports also offer incredible extensibility, flexibility and connectivity to the Core switch or Servers.

Features

Up to 30W of Power on
IEEE 802.3af /at
Compatible With All IEEE 802.3af/at
Safe: Low Power Devices Receive Only the Power TheyNeed
Safe and Reliable Power to WLAN Access Points
Automatic Detection and Protection of Non standardEthernet Terminals
Supports 10/100/1000 Base T applications
Compact Design Fits Easily in WLAN Access
Plug-and Play no configuration required
Internal power supply
Easy installation and maintenance
Save up to 83% power with Green Technology
complies to IEEE 802.3af PoE standard and is backward