Description

1. The power supply of the host only supports 12V, and the full load is about 30W. It is recommended to use 12V4A or above power supply;
2. Host VGA, HDMI support single display, double display copy, double display expansion, single display under DOS ;
3. The host blue group USB interface, the lower part is USB3.0, the upper part is USB2.0 ; the black group USB is USB2.0;
4. The host MSATA interface defaults to the coexistence of SATA signals and USB signals, and supports MSATA hard drives or WiFi modules with USB signals by default;
The SATA signal can be changed to the PCIE signal, and after the change, it can support the PCIE signal WiFi module;
5. The host Mini-PCIE interface defaults to coexistence of PCIE signals and USB signals, and supports WiFi/3G/4G/Bluetooth WiFi modules by default ;
6. All USB interfaces of the host are S power (no power after shutdown), and cannot be changed to A power (power after shutdown);
7. The COM port of the motherboard supports RS232 by default; among them, COM2 can choose RS232/RS422/RS485, which can be controlled by jumper JP9/JP10/JP11;
8. The main board COM1/2 can set the ninth pin live 5V/12V through JCOM1/2, and the default is 0V;
9. The host supports optional 100M network card and Gigabit network card; single network port and dual network port are optional; POE power supply cannot be changed;