Description

Modern business networks are used for increasingly diverse applications – traditional data streams, VoIP voice traffic, video output from digital security cameras and remote control devices to name a few. The range of devices attached to today’s converged network often need to be supported not just in terms of data – equipment such as VoIP IP telephones and Wireless Access Points frequently need to be powered in physical locations where mains power is not available or difficult to deliver. Providing power to such devices via an Ethernet UTP cable is an elegant and easy to implement solution.
The 24 Port 10/100Mbps PoE+ Switch offers advance switching controls and provides power to network devices using Ethernet cables. This scalable and cost effective solution allows a managed network to efficiently expand to previously unattainable levels.
compatible to IEEE802.3af/at. It can power both existing
10/100Base-T network devices Wi-MAX and wireless
IEEE 802.11n access points.

Hardware Specification
10/100Mbps Copper Ports		24 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports
1000Mbps Copper Ports		2 10/100/1000Mbps RJ-45 Auto-MDI/MDI-X ports
SFP/mini-GBIC Slots		2 1000Base-SX/LX, shared with Port-25~Port-26
Switch Architecture		Store-and-Forward
Switch Fabric		8.8Gbps / non-blocking
Switch Throughput		6.547Mpps @64Bytes
Address Table		8K entries
Share Data Buffer		512Kbytes
Maximum Frame Size		9K Bytes
Flow Control		Back pressure for Half-Duplex IEEE 802.3x Pause Frame for Full-Duplex
LED		Power, PoE (yellow ) 10/100 LINK / ACT (Green) 1000 ACT(Green);1000 LINK(yellow)
Reset Button		< 5 sec: System reboot > 5 sec: Factory Default
Dimension (W x D x H)		440 x 220 x 44 mm, 1U height
Weight		4 kg
Power Requirement		100~240V AC, 50-60 Hz
Power Consumption / Dissipation		350 Watts maximum /1194 BTU/hr maximum

Power over Ethernet
PoE Standard	IEEE 802.3af/at Power over Ethernet / PSE
PoE Power Supply Type	End-Span
PoE Power Output	Per Port 52V DC, 350mA~600ma . Max. 30 Watts
Power Pin Assignment	1/2(+), 3/6(-)
PoE Power Budget	320 Watts
Max. number of Class 3 PD	24

High Performance Wire-Speed Switching

The PSE-2624GSR offers 24 10/100Mbps Fast Ethernet ports and 2 Gigabit TP/SFP combo ports. The two Gigabit TP/SFP combo ports
can be either 1000Base-T for 10/100/1000Mbps or 1000Base-SX/LX through SFP (Small Factor Pluggable) interface. PSE-2624GSR boasts a high performance switch architecture that is capable of providing non-blocking switch
fabric and wire-speed throughput as high as
8.8Gbps. Its two built-in GbE uplink ports also
offer incredible extensibility, flexibility and connectivity to the Core switch or Servers

Ordering Information
Part Number Description

PSE2624GSR: 24-Port 10/100Mbps /PoE +2 Gigabit
TP/SFP Combo Ports Poe Switch (350W)

Features

Up to 30W of Power on
IEEE 802.3af/at
Compatible With All IEEE 802.3af/at or Legacy
Safe: Low Power Devices Receive Only the Power TheyNeed
Safe and Reliable Power to WLAN Access Points
Automatic Detection and Protection of Non–standardEthernet Terminals
Supports 10/100 Base-T applications
Compact Design Fits Easily in WLAN Access
Plug-and-Play no configuration required
Internal power supply
Easy installation and maintenance
Save up to 83% power with Green Technology
complies to IEEE 802.3af PoE standard and is backward

Standards Conformance
Standards Compliance		IEEE802.3:10Base-T IEEE802.3u: 100BaseTX IEEE802.3z:1000Base-SX/LX IEEE802.3ab:1000Base-T IEEE802.3af/at: Power over Ethernet
Environemmental
Operating		Temperature: 0 ~ 50 Degree C Relative Humidity: 20 ~ 95%
Storage		Temperature: -10 ~ 70 Degree C Relative Humidity: 20 ~ 95% (non-condensing)