SunShine-Tek Android board flash the resolution program

SunShine-Tek Android board flash the resolution program

SunShine-Tek Android board flash the resolution program

Steps:
1. Copy the “yx_lcd_parameters” file to the U disk root directory
2. Insert the U disk to the android board and plugin the DC power adapter
3. After the firmware flash finished, the android board will automatically shutdown and reboot, remove the U disk from the android board when it reboot.
4. Flash Done.

Copy under the text to yx_lcd_parameters file, configure the value to adapt of your LCD panel and saved.

screen_type = 3;
# 2 单lvds
# 3 双lvds
# 9 edp

100 使用系统默认屏参
screen_lvds_format = 3;
# 0 8bit 1
# 1 8bit 2
# 2 8bit 3
# 3 6bit

screen_face = 33;
# 0 OUT_P888
# 1 OUT_P666
# 33 OUT_D888_P666

screen_x_res = 1920;
screen_y_res = 1080;

screen_pixclock = 148500000;
screen_hbp = 160;
screen_hfp = 120;
screen_hsync_len = 40;
screen_vbp = 20;
screen_vfp = 20;
screen_vsync_len = 5;

#相关CLK的相位 0 表示不反向 1表示反向
screen_pin_hsync = 0;
screen_pin_vsync = 1;
screen_pin_den = 0;
screen_pin_dclk = 1;

#RGB 颜色互换
screen_swap_rb = 0;
screen_swap_rg = 0;
screen_swap_gb = 0;
screen_swap_delta = 0;
screen_swap_dumy = 0;

Leave a Comment

Your email address will not be published.